Triggered by Push Button, Web UI or the App - Road mode locks your number plate in a fully displayed position and temporarily disables the use of any button/trigger to flip the plate. In Road mode you know your plate is on display.

Standard
1 Fully Customisable profile via the Web UI, set your plate to any position 1-100% and recall using any button/trigger to flip the plate.

Edge
2 Fully Customisable profiles via dedicated QuickFlip Edge App. Set your plate to any position 0-100%, recall and operate profiles from any button/trigger to flip the plate.

Standard
Handlebar mounted button. For clarity just glance at the button.
- No LED when plate is on show
- Red LED when plate is flipped.
- Hold button for 3 seconds to switch modes.

Edge
Handlebar mounted button. For absolute clarity just glance at the button.
- No LED when plate is on show
- Red LED when plate is flipped in Track mode
- Blue LED when plate is flipped in Show mode
- Flashing LED to indicate an issue.

Standard
Connect to your QuickFlip Standard via Wi-Fi and adjust settings using our browser based user interface.

Edge
Connect to your QuickFlip Edge using our dedicated iOS/Android App

Number plate always returns to fully displayed position on start up of your Bike. This feature can be turned off on the Web UI/App.

Use the App to have full control over your plate light.
- On at all times
- Off at all times
- Automatic Plate Light (APL)

Standard
Push Button feedback is based off a commanded position, regardless of plate position.
Perfect for simplicity.

Edge
An encoder confirms the actual plate position and provides live diagnostics. If the plate position differs to the commanded position your push button will flash Red/Purple to highlight there is an issue.
Perfect for absolute clarity.

Built in encoder to give you 100% confidence your plate is in the position you have instructed to be in.

Any deviation will flag an error via push button and/or app.

Remote firmware updates using our dedicated QuickFlip app, Edge only.